Product benefits
- Easy installation
- Low energy consumption
- Easy relamping thanks to compact design
- Operation directly on 230 V AC mains possible
Areas of application
- General illumination within ambient temperatures from -20…+45 °C
- Supermarkets and department stores
- Walkways and corridors
- Hotels, restaurants
Product features
- LED replacement for conventional compact fluorescent lamps for use in CCG luminaires or on AC mains
- Lifetime up to 30,000 h
- Rotatable base around its longitudinal axis (± 90°)
- Single-ended two-pin plug-in G24d base
- Type of protection: IP20
- Mercury-free lamps
Safety advice
- Not suitable for tandem operation.
- The operating temperature range of DULUX LED is restricted. In case of doubt regarding suitability of the application please measure Tc temperature on the product prior to installation.
- All electrical connections must be made by a qualified person.
- Do not touch the lamp with bare fingers.
- Must not be used if outer bulb is defective.
- Lamp not suitable for emergency operation.
Electrical data
| Nominal wattage | 9 W |
| Construction wattage | 9.00 W |
| Nominal voltage | 220…240 V |
| Operating mode | CCG, AC Mains |
| Claimed equiv. conventional lamp power | 26 W |
| Nominal current | 43 mA |
| Type of current | AC |
| Inrush current | 18.2 A |
| Suitable for DC input | Yes |
| Input voltage DC | 186…260 V 1) |
| Operating frequency | 50/60 Hz |
| Mains frequency | 50/60 Hz |
| Max. lamp number on MCB B10 A | 32 |
| Max. lamp number on MCB B10 A – CCG without compensation | 93 |
| Max. lamp number on MCB B10 A – CCG with compensation | 8 |
| Max. lamp number on MCB B16 A | 41 |
| Max. lamp number on MCB B16 A – CCG without compensation | 149 |
| Max. lamp number on MCB B16 A – CCG with compensation | 11 |
| Total harmonic distortion | ≤ 30 % |
| Power factor λ | > 0.90 |
1) Permitted voltage range
Photometrical data
| Luminous flux | 1100 lm |
| Nominal useful luminous flux 90° | 1100 lm |
| Luminous efficacy | 122 lm/W |
| Lumen main.fact.at end of nom.life time | 0.70 |
| Light color (designation) | Cool White |
| Color temperature | 4000 K |
| Color rendering index Ra | 80 |
| Light color | 840 |
| Standard deviation of color matching | ≤6 sdcm |
| Flickering metric (Pst LM) | 1.0 |
| Stroboscope effect metric (SVM) | 0.4 |
Light technical data
| Beam angle | 120 ° |
| Warm-up time (60 %) | ‹ 0.50 s |
| Starting time | < 0.5 s |
Dimensions & Weight
| Overall length | 171.00 mm |
| Diameter | 35.00 mm |
| Tube diameter | 27,0 mm |
| Maximum diameter | 35 mm |
| Product weight | 61.00 g |
Temperatures & operating conditions
| Ambient temperature range | -20…+45 °C 1) |
| Maximum temperature at tc test point | 75 °C |
1) Temperature surrounding the lamp – for enclosed luminaires: temperature inside of the luminaire
Lifespan
| Lifespan L70/B50 at 25 °C | 30000 h |
| Number of switching cycles | 200000 |
| Lumen maintenance at end of service lifetime | 0.70 |
| Rated lamp survival factor at 6,000 h | ≥ 0.90 |
Additional product data
| Base (standard designation) | G24d-3 |
| Mercury content | 0.0 mg |
| Mercury-free | Yes |
| Design / version | Frosted |
Capabilities
| Dimmable | No |
Certificates & Standards
| Energy efficiency class | E 1) |
| Energy consumption | 9.00 kWh/1000h |
| Type of protection | IP20 |
| Standards | CE, EAC, UKCA |
| Photobiological safety group acc. to EN62778 | RG0 |
1) Energy efficiency class (EEC) on a scale of A (highest efficiency) to G (lowest efficiency)
Country-specific categorizations
| Order reference | DULUX LED D26 E |
LOGISTICAL DATA
| Temperature range at storage | -20…+80 °C |
IESSE Wall Lantern 1xE27 Black
DULUX L 18 W/840 2G11
Wall Light 2xE27 grey
UMBERTA Sensor Ceiling Light 2xE27 IP66 Grey
Spot Light 1xGU10 S/S
Ceiling Motion Sensor Round
LED Spot GU10 3.5W 3000K
UMBERTA Ceiling Light 2xE27 IP66 White
LED Lamp G9 4W 4000K
LED RGB remote control 24 Key
LED Lamp GX53 3W CCT
FILAMENTAP45CL3.4WD
LED PAR30 E2712W 4000K
PIR Sensor recessed
T5-14W/840
BISSO/ANNA LANTERN 1xE27 200cm Black



There are no reviews yet.