LED DRIVER 24V 150W (175-264Vac)
| MODEL | led power supply | IL-D15024SLIM | |||
| OUTPUT | Output voltage | 24VDC | |||
| Output voltage range | 24VDC±0.5VDC | ||||
| Output Current | Max 6.25A | ||||
| Output power | Max 150W | ||||
| Output power range | 0~150W | ||||
| Linear Regulation | ±1% | ||||
| Load Regulation | ±1% | ||||
| Start-up Time (Typ) | 500ms/230Vac | ||||
| Hold Up Time(Typ) | 12ms/230Vac | ||||
| INPUT | Input voltage | 175-264Vac | |||
| Frequency | 50Hz | ||||
| Input current | 1.76A/230Vac | ||||
| Power factor | PF>0.55 | ||||
| No-load power consumption | <0.5W | ||||
| Efficiency (typ.) | 92% | 92% | 93% | 93% | |
| Inrush current(typ.) | Cold start 65A at 230Vac | ||||
| Control surge capability | L,N:1KV L,N-PE:2KV | ||||
| Leakage current | Max.0.5mA | ||||
| ENVIRONMENT | Working temperature | ta: -30°C ~ 50°C tc: 80°C | |||
| Working humidity | 20 ~ 99%RH, condensing | ||||
| Storage temp., humidity | -40°C ~ 80°C, 10~95%RH | ||||
| PROTECTION | Overtemperature | Protection type: Turn off the output voltage, after the temperature drops, re-energize to restore. | |||
| Over load protection | Shut down the output when current load ≥110%~150%, auto recovers | ||||
| Short circuit protection | Protection type: It can be automatically restored after the fault is eliminated. | ||||
| SAFETY&EMC | Withstand voltage | I/P-O/P: 2000Vac | |||
| Isolation resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH | ||||
| EMC Test Standards | EN55015:2013;EN61547:2009
EN61000-3-2:2014;EN61000-3-3:2013 |
||||
| Reliability and Quality Control | Impact aging | 100% of the product is fully loaded and impacted for 4 hours under an environment of at least 40°C±5°C | |||
| Component derating | Under the steady-state conditions of rated input and output, the stress of components will not exceed its maximum nominal value | ||||
| NOTE | 1.All parameters not specifically mentioned are measured at 230VAC input, rated load and 25°C ambient temperature.
2.Ensure that the power supply is used under the rated parameters and environment |
||||
LED switch power supply
- Conversion efficiency:93%
● Crimp type wiring, flexible installation;
● High power density, small size, high only 18mm,saving installation space
● 100% full load burn-in test
● Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.
● Equipped with over temperature, over current protection, short circuit protection, UVP, OVP
● Widely used in LED lighting and IT equipment
● Compliance to worldwide safety regulation for led lightings.
Recessed Spot Light SV Round
UMBERTA Ceiling Light 2xE27 IP66 Black
Recessed Spot Light BK round
BERTA Ceiling Light 1xE27 IP66 White
UMBERTA Ceiling Light 2xE27 IP66 White
GU10 Lamp holder w/ connection box
Surface Aluminum profile 13,5X7mm - 2 meter
Profile Motion Sensor
LED Spot GU10 3.5W 3000K
IL-D20024SLIM
BERTA Ceiling Light 1xE27 IP66 Black
UMBERTA Ceiling Light 2xE27 IP66 Grey
Recessed Aluminum profile 18x8x2000mm




There are no reviews yet.